Check stock after changing quantityCR1-E Crank Arm Set｜ Other Products
【COL-05856617e912578879a4710eb500601253d3adab】
| Category | Other Products / General Merchandise / Other Products |
|---|
| 47.50 USD |
Recommended Other Products products
Customers who viewed this item also viewed
![Other Products ｜Bijzettafel Ledepid ronde tafelblad naturel [en.casa]](https://cdn.shopify.com/s/files/1/0902/7466/0733/files/Beistelltisch-Nebentisch-Sofatisch-Telefontisch_PXCH-0085_beispiel.jpg)
- 33.00 USD
Product description
FEATURES
Made from 6066-T6 Aluminum. Cold forged then CNC machined.
EFBE Cat 5 Gravity EPAC certified.
155mm and 160mm crank length options.
Compatible with DJI Avinox, Bosch CX Gen 4/ Gen 5, Bosch SX, Brose S-Mag, TQ HPR50 and Specialized 2.2 & 3.1 and all ISIS spindle motors.
27mm offset
155mm crank arms with bolts = 488 grams
160mm crank arms with bolts = 500 grams
INSTALLATION
Tools Required:8 mm Allen key
Slide the drive-side crank arm onto the motor spindle, making sure the splines are correctly engaged.
Thread the crank bolt in by hand, then tighten using an 8 mm Allen key. The crank arm should draw smoothly onto the spindle.
Install the non-drive-side crank arm, ensuring it is positioned 180° opposite the drive-side arm.
Tighten both crank bolts to 50 Nm using a torque wrench.
Check that both crank arms are fully seated and rotate freely without contacting the motor housing or frame.
CRANK BOLT TORQUE: 50 Nm
Brand:Title MTBSKU:661317991872Tags:Shopify Collective, Title MTBColor:Black, ChromeSize:155mm, 160mm
Made from 6066-T6 Aluminum. Cold forged then CNC machined.
EFBE Cat 5 Gravity EPAC certified.
155mm and 160mm crank length options.
Compatible with DJI Avinox, Bosch CX Gen 4/ Gen 5, Bosch SX, Brose S-Mag, TQ HPR50 and Specialized 2.2 & 3.1 and all ISIS spindle motors.
27mm offset
155mm crank arms with bolts = 488 grams
160mm crank arms with bolts = 500 grams
INSTALLATION
Tools Required:8 mm Allen key
Slide the drive-side crank arm onto the motor spindle, making sure the splines are correctly engaged.
Thread the crank bolt in by hand, then tighten using an 8 mm Allen key. The crank arm should draw smoothly onto the spindle.
Install the non-drive-side crank arm, ensuring it is positioned 180° opposite the drive-side arm.
Tighten both crank bolts to 50 Nm using a torque wrench.
Check that both crank arms are fully seated and rotate freely without contacting the motor housing or frame.
CRANK BOLT TORQUE: 50 Nm
Brand:Title MTBSKU:661317991872Tags:Shopify Collective, Title MTBColor:Black, ChromeSize:155mm, 160mm
