Check stock after changing quantitySuper Por-Rok® Premium Cement Based Anchoring Cement｜ Other Products
【COL-0b5cd0b0bc7333394ee032b57d0c5a13c528ce8d】
| Category | Other Products / General Merchandise / Other Products |
|---|
| 65.54 USD |
Recommended Other Products products
Customers who viewed this item also viewed
- 16.50 USD
- 101.70 USD
Product description
Super Por-Rok is a non-shrink, hydraulic, controlled-expansion anchoring cement that sets in 20-30 minutes and outperforms concrete strength within 6 hours
Super Por-Rok is a ready-to-use anchoring and patching cement — just add water on site. It's designed for anchoring heavy machinery, railings, guard rails, and banisters, and for repairing cracks in damaged concrete substrate, with no rodding, chaining, or vibrating required.
Key Features & Benefits
Pourable, ready-to-use preparation — no heating or two-component mixing needed
Ideal for patching floors, walls, and cracks, and caulking foundation or wall voids
Suitable for interior or exterior use
Quick setting — sets in 20-30 minutes and expands as it sets
Stronger than concrete within 6 hours
Complies with ASTM C1107 properties when tested at 73°F
Application Instructions
Mix with clean potable water at 15% by weight (or about 2.3 oz of water per pound of product for small batches) to a smooth, flowable consistency
Pour around the anchoring bolt or into the prepared hole, filling even with the substrate level — do not leave in conditions where water can puddle
Concrete should be at least 28 days old and fully cured before anchoring
Clean the hole of all debris and dampen the sides and bottom before pouring
Use an appropriately sized flat washer for the anchor bolt
Avoid drilling anchor holes within 4 inches of concrete corners or edges
Keep application temperatures above 32°F for at least 24 hours after placement
Packaging
Available in 10 lb pails (case of 4) and 50 lb pails (pack of 6).
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:POR-SUPERPR-10-PAILTags:Cementitious Products and LiquidsSize:10 lb Pail (Case of 4), 50 lb Pail (Pack of 6)
Super Por-Rok is a ready-to-use anchoring and patching cement — just add water on site. It's designed for anchoring heavy machinery, railings, guard rails, and banisters, and for repairing cracks in damaged concrete substrate, with no rodding, chaining, or vibrating required.
Key Features & Benefits
Pourable, ready-to-use preparation — no heating or two-component mixing needed
Ideal for patching floors, walls, and cracks, and caulking foundation or wall voids
Suitable for interior or exterior use
Quick setting — sets in 20-30 minutes and expands as it sets
Stronger than concrete within 6 hours
Complies with ASTM C1107 properties when tested at 73°F
Application Instructions
Mix with clean potable water at 15% by weight (or about 2.3 oz of water per pound of product for small batches) to a smooth, flowable consistency
Pour around the anchoring bolt or into the prepared hole, filling even with the substrate level — do not leave in conditions where water can puddle
Concrete should be at least 28 days old and fully cured before anchoring
Clean the hole of all debris and dampen the sides and bottom before pouring
Use an appropriately sized flat washer for the anchor bolt
Avoid drilling anchor holes within 4 inches of concrete corners or edges
Keep application temperatures above 32°F for at least 24 hours after placement
Packaging
Available in 10 lb pails (case of 4) and 50 lb pails (pack of 6).
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:POR-SUPERPR-10-PAILTags:Cementitious Products and LiquidsSize:10 lb Pail (Case of 4), 50 lb Pail (Pack of 6)
